Atomstack P7 M40

We have already presented or even tested a few laser engravers here on the blog. I haven’t had any experience with these devices, but I’ve been interested in them for a long time. Therefore, here is the first attempt to do so with the Atomstack P7 M40. A laser engraver intended for beginners.

With the Atomstack X7 Pro Laser Engraver you have brought a very good engraver onto the market. With the P7 M40, a very beginner-friendly model is coming onto the market. This should not be too expensive and just user-friendly. For example, you don’t have to go through a complicated setup, you can get started almost directly via plug & play.

What can I engrave with the laser engraver? The choice is actually quite large. From simple plywood engravings to stone, glass, paper to leather or even supposedly food, everything is included.

Of course, choosing the right laser also plays a role here, but that is already mentioned in the previous section. With all this stuff and a good cutting laser you can definitely do a lot of cool things. This is particularly useful for personalized gifts.

On the shop page there is also a more detailed table with the different uses on different materials of the three lasers. What none of the three can do is highly reflective materials, such as glossy metal plates, transparent or sometimes plain white material. It must not reflect the laser too much.

The Atomstack P7 M40 knows how to convince, at least for beginners, and that is exactly what it is used for. Especially for first attempts, you usually do not want a complicated structure, days of troubleshooting or a device in which no protective measures are integrated. Simple handling with a wide range of applications and still enough flexibility with a work surface of 200*200 mm, three different lasers and optional accessories, which makes work even easier.