HOMFPV Unicorn
1. Ultra-thinbody Design
2. Rear USB Position
3. True X Body
4. Fully Product DJI VTX
5. Bottom Landing Gear Design
6. Built-in RGB LED Light
Description
HomFPV (a brand of TransTEC) offers a new Tinywhoop, the 2-inch Unicorn. It is a small format model in white and pink – the girlie effect is clearly in demand. Its diagonal is 9 cm from engine to engine. It rests on a carbon X structure to which the engines and propeller guards are attached. The motors are brushless 1203 to 5000KV for four-bladed Gemfan 2036 propellers. The flight controller is an F4 AIO flashed with Betaflight, with an active OSD, associated with an ESC 4 in 1 of 10A BLheli_S. The microUSB socket for making adjustments is unusually placed at the rear of the unit, horizontally. The integrated LED is programmable via Betaflight.
The Unicorn 2p is equipped with a Nebula Nano V2 camera and a Caddx Vista housing, compatible with DJI’s HD video return system. Both are protected by a central fairing that is quite low in comparison to other devices, which allows for a lower centre of gravity. The equipment is complemented by an LHCP polarised antenna. The power supply socket is an XT30. HomFPV does not supply a battery, but recommends Lipos 4S of 450 mAh. There is no radio receiver included. The device can be used directly with the DJI radio control. With another radio protocol, you will need to install a receiver yourself.
HOMFPV Unicorn Prices
Price History
Additional information
Specification: HOMFPV Unicorn
|
There are no reviews yet.