Ortur 4 V2

Ortur 4 V2 GRS Linear Guide Rail High Speed Open Source Heavy Duty FDM 3D Printer

If we find fairly standard characteristics for an FDM printer, the Ortur 4 V2 offers a Hotbed Auto Leveling & Z Offset, namely a heating plate at 90 °C, automatic leveling, dynamic offset calculation and a double Z axis. An end of filament sensor is also fitted to the Ortur4. In addition, the 3 axes X, Y and Z are based on double linear axes which offer both speed and precision of movement! This important point of detail is also protected by a patent.

The printing volume of Ortur 4 V2 is 260 x 310 x 305 mm on a heating bed up to 100 ° with an accuracy of 50 microns minimum, 400 maximum. The single extruder will heat up to 275 °C, allowing all kinds of PLA, PETG, PVA, etc. The original nozzle is a 0.4 mm but it is possible to change it simply for a 0.2, 0.3 or 0.5 mm.

Ortur 4 V2 Open Source Marlin 2.0 firwmare will appeal to makers who want to get the most out of their 3D printer. Cura, Simplify3D, Slic3r and Repetier-Host are the software recommended by Ortur to manage this Ortur4. The assembly is done in a few minutes since the Ortur is delivered pre-assembled. The 3D printer comes with a 16GB SD card and 10 meters of PLA.

From a security point of view, all cables that are properly sheathed and protected in “chains” have been largely sized to collect the current necessary for the proper functioning of the Ortur 4 V2 3D printer. In this regard, the Ortur 4 is supplied with 24V with 2 fuses which protect against possible short circuits.